Tee, which is used in the branches, is a connection component of pipe fittings with the style of equal diameter and reducing tee. Various standards bring various categories as below:
...- Add Trackback
- Click：
In a piping system, when need branching, a tee is indispensable. For tee produced by seamless pipe, the technic applied are hydraulically swelled forming and thermoforming.
...
- Add Trackback
- Click：
China, now, is the largest country of manufacturing and consuming building materials all around the world, with the main product kinds of concrete, sheet glass, building used ceramic, stone and wall materials ranked the first in the world for so many years. Meanwhile, along with the quality of the products developing, and the consuming of energy and raw materials decreasing, there spring up various new style building products, resulting in fast upgrading and updating.
...
- Add Trackback
- Click：
Ball valve was invented in 1950s. In the past 40 years' time, with the development of science and technology, and the improvement of the productive technology and structure of the production, ball valve has now became the main valve. In western countries, the application of ball valve is increasing in the fields where of vital to the national economy, such as petroleum refining, long pipeline transportation, chemical industry, papermaking, pharmacy, water conservancy, electricity, municipal administration and steel industry.
...- Add Trackback
- Click：
A union, is convenient to install and dismounting in the piping system, generally produced by steel rod or steel ingot after being swaged, providing a simple transtion, allowing easy connection or disconnection at future time for it consisting of a nut, a female end, and a male end. When the female and male ends are joined, the nuts then provide the necessary pressure to seal the joint. Since the mating ends of the union are interchangeable, changing of a valve or other device can be achieved with a minimum loss of time. Pipe unions are essentially a type of flange connector, as discussed further below.
...- Add Trackback
- Click：
Elbow is a kind of pipe fittings with the function to change the direction of fluid or gas inside the pipeline.
There are so many methods to classify the elbow according different standards as below:
...
- Add Trackback
- Click：
In a piping system, every type of pipe fitting is crucial and indispensable, of course, including elbow which is a pipe or tubing length to connect the two pipes to be connected with a changge of direction of a certain angle.
...- Add Trackback
- Click：
When we design or manufacture any piping systems, there are certain standard codes of pipe fittings that should be followed. The authoritative organizations have promulgated that pipe fittings' standards include:
...- Add Trackback
- Click：
The material with which a pipe fittings are manufactured often forms as the basis for differents applications and differents places. Hrer, a introduction of the materials of pipe fittings will be presented to you:
...- Add Trackback
- Click：
Pipe Fittings is a big system of the small but crucial parts when you install a pipe and plumbing system, without even one part, it is impossible for you to complete the task.Pipe fittings are appliable in the pipe and plumbing systems to connect straight pipe or tubing sections, to adapt to different sizes or shapes, and for other purposes, such as regulating or measuring fluid flow.
...- Add Trackback
- Click：